While or after installing a Netgear router, you may see numerous LED lights flashing on the WiFi router. Every LED light on a router has a specific meaning. For example, if the LED light on your router blinks solid green it means that everything is perfect. On the off chance, if the LED light flashes red from green it indicates that your Netgear WiFi router caught some issue. However, many people have been facing red light issues. If you are also that kind of person then worry not. You are exactly where you need to be. In this post, we will provide you with troubleshooting hacks to resolve the red light issue.
Reasons Behind Netgear Router Red Light Issue
There are a number of causes why you are facing router red light issues. Some of the most common factors are highlighted below:
- The distance between the wireless devices is not optimal
- The WiFi connection is shaky.
- The power cable connection is not secure.
- Insufficient power supply.
- Outdated or corrupted firmware.
- The connection is overlapped.
Fixed: Netgear Router Red Light Issue
Resolving the Netgear router red light issue is quite simple. Follow the hacks discussed below to fix the issue.
- Restart Your Netgear Router
Before moving to the troubleshooting hacks power cycle your Netgear WiFi router. The reason is rebooting or restarting will fix some minor technical glitches. For the power cycle, disconnect the router from the existing modem. Subsequently, turn off the switch and unplug it from the power socket. Hold on a little while. Now, put the router back into the electrical outlet and turn it on.
- Check Power Supply
Does your WiFi device not acquire sufficient power supply from the electrical outlet? Probably, you would not be caught in the web of the red light problem. To get rid of this issue, confirm that your Netgear router is getting a stable and adequate power supply. On the off chance, if the power socket you use is plugged into the router is faulty, then insert your router into another wall socket.
- Close the WiFi Device
If the distance between your wireless devices is not accurate, then you are bound to face issues similar to the one you are facing right away. To do away with this problem, locate the router and modem in the same room. Neither too far nor too close.
- Verify Ethernet Cable
As we discussed earlier, a loose cable connection can also lead to technical hiccups. To eliminate this issue, check all the cable connections. Make sure that the Ethernet cable connection is finger-tight.
- Keep Away WiFi Interference
One more way to fix the Netgear router red light issue is by placing it away from objects like mirrors, insulated walls, microwaves, baby monitors, fish tanks, treadmills, etc.
- Reset Your Router
If none of the aforementioned troubleshooting tips would have helped you to resolve the Netgear router red light issue then resetting the router to its default settings. For reset walk through the instructions given below:
- First of all, find the reset button available on your router.
- Once found, press or hold the button gently using a sharp pointed object.
- Wait for a couple of seconds.
- Now, release it.
In this way, you can reset the Netgear router. Just in case, if the red light issue persists then chances are that you are not upgrading the router firmware for a long time. To troubleshoot this issue, update the firmware to its latest version.
- Update the Firmware
For this, access the router web page using the default web address i.e. routerlogin.net. Within a few seconds, the Netgear login window will appear. Here, input the default values and hit the Log In button. You will be redirected to the Netgear Genie setup wizard. Now, navigate to the settings and select the Firmware Update button. Thereafter, follow the on-screen guidelines to complete the process.
Sum Up
Hopefully! We conclude our guide on how to fix the Netgear router red light issue. We expect that with the hacks discussed in this article, you easily troubleshoot the router red light problem.